FKM
FKM FKM material, bisphenolic cured Fluorine content 66% complies with SN (Siemens regulation) 53145-1 More information about this product Producttype Gaskets Temperature +250 °C Material Properties Color Black Typical Physical Properties Density 1,93 ± 0,03 g/cm3Maximum Temperature +250 °CTensile strength7.5 N/mm2Elongation at break 330 % More information about this product? Download our product datasheet Get […]
PTFE Virgin
PTFE Virgin Virgin PTFE sheet, frequently misidentified as Teflon sheet, is a high performance thermoplastic with a very low moisture absorption rate, an incredibly low coefficient of friction, and good dielectric strength. PTFE sheet is made of a fluoropolymer with low friction and exceptional chemical and weather resistance. PTFE sheets are available in various sizes […]
PTFE 25% Carbon Filled
PTFE 25% Carbon Filled PTFE 25% Carbon Filled is a high performance, synthetic fluoropolymer with the carbon fibre greatly improving by a notable margin characteristics including electrical properties, deformation strength and wear and abrasion resistance. Carbon is a brittle material itself, having poor wear properties and mechanical strength. The resulting material after the mixture of […]
PTFE Graphite Filled
PTFE Graphite Filled PTFE TEFLON GRAPHITE has good thermal conductivity, is Chemically inert, Low friction. Minimum wear to mating surface. Graphite has good chemical resistance to corrosive environments and exhibits good initial wear and rubbing/sliding characteristics in dry and water applications. Commonly blended with carbon and PTFE. The Filled Grade PTFE TEFLON products are widely […]
25% Glass Filled
25% Glass Filled 25% Glass filled PTFE is used to improve the creep resistance of PTFE over all temperature ranges, while still allowing some compression required for sealing in both gaskets and valves. Improved wear behaviour is exhibited, while there is little effect on the electrical properties, as glass fibre is an insulator. 25% Glass […]
Metal Spring-Energized Face Seals
Metal Spring-Energized Face Seals This face seal is designed with a spring-energizer in a C-Seal jacket, which is a self-pressure, activated design to provide an effective metal-to-metal leak proof solution. The proper combination of the base materials and surface coatings make it possible to seal almost any fluid at extreme temperatures and pressures without deterioration […]
Metal Turbo Seals
Metal Turbo Seals Metal turbo seals have been engineered to be used in applications that require light loading, flexibility, and high temperature capability. They can be energized by a spring to enhance the sealing performances of the seal. More information about this product Producttype Gaskets Temperature Cryogenic to +1010°C (+1859°F) Pressure 3 to 30 BAR […]
Metal V-Seals
Metal V-Seals This metal face sealing solution allows higher flange lift-off, a lower bolt force requirement and is highly pressure activated. More information about this product Producttype Gaskets Temperature Cryogenic to +1100°C (+2012°F) Pressure Vacuum to 300 psi (20 bar) Used in Low load requirements & limited leak tightness requirements Typical Physical Properties Maximum Temperature […]
Metal O-Rings
Metal O-Rings These metal face seals are long lasting seals and unlike non-metallic seals, they are not subject to failure due to incompatibility with the environment, outgassing, or deterioration from age. More information about this product Producttype Gaskets Temperature -250°C to +1100°C (-423°F to +2000°F) Pressure High vacuum to 25,000 psi (1723 bar) Used in […]
Metal E-seal
Metal E-seal Metal face E-Seals are engineered to operate in demanding applications such as in aviation applications that require light loading, flexibility, and high temperature capability. The seals operate primarily within the elastic limits of the material. Available as internal and external pressure face sealing solutions, they can be custom designed with platings or coatings […]
